Ks0174 keyestudio HM-10 Bluetooth-4.0 V2

Introduction

keyestudio HM-10 Bluetooth-4.0 V2 adopts TI CC2541 chip, configuration space of 256Kb.
It supports AT command. Users can modify working mode (master/slave), baud rate, device name, paring password, etc.

Specification

• Bluetooth protocol: Bluetooth Specification V4.0 BLE
• No byte limit in serial port Transceiving
• In open environment, realize 100m ultra-distance communication with iphone4s
• USB protocol: USB V2.0
• Working frequency: 2.4GHz ISM band
• Modulation method: GFSK(Gaussian Frequency Shift Keying)
• Transmission power: -23dbm, -6dbm, 0dbm, 6dbm, can be modified by AT command.
• Sensitivity: ≤-84dBm at 0.1% BER
• Transmission rate: Asynchronous: 6K bytes ; Synchronous: 6k Bytes
• Security feature: Authentication and encryption
• Supporting service: Central & Peripheral UUID FFE0, FFE1
• Power consumption: Auto sleep mode, stand by current 400uA~800uA, 8.5mA during transmission.
• Power supply: 5V DC
• Working temperature: –5 to +65 Centigrade

Circuit Connection

Sample Code

int val; 
int ledpin=13; 
void setup() 
{ 
Serial.begin(9600);
 pinMode(ledpin,OUTPUT); 
} void loop()
{ val=Serial.read(); 
if(val=='a')
 { 
digitalWrite(ledpin,HIGH); 
delay(250); 
digitalWrite(ledpin,LOW); 
delay(250);
 Serial.println("keyestudio");
}
}

Result

Open APP HC-COM, click search device, select the device, device is connected; the LED on the Bluetooth module is on. Enter “a” in HC-COM, click send, Bluetooth APP will display keyestudio. Every time HC-COM sends an “a”, the Pin13 LED on the main board blinks once.

Resources

• PDF File:
  

https://drive.google.com/open?id=1IXjIFG6mqyAJPJ5mj4lPFEKxSVbCrPaz

• Code:
  

https://drive.google.com/open?id=1bh5Ze_To6D1pbqrnljZwR2vTioGBTNze

• APP HC-COM:
  

https://drive.google.com/open?id=18m7X9dBpNTfcAFRn1rq-3Qg6NH7HuTI3

https://drive.google.com/open?id=1tbjdbMVIiOkrhrps-h3sR517Qg9iTCp6

• Video:
  

http://video.keyestudio.com/ks0174/

Get One Now

• Official Website

• Shop on Amazon

• Shop on aliexpress