View source for KS0496 Keyestudio EASY Plug Shield for micro bit V1.1


<br>[[Image:0496.png|500px|frameless|right|]]<br>

<br>
==Introduction==

Micro bit is a basic development board designed by BBC for teenagers programming education. It supports the PXT graphical programming, used on Windows, macOS, IOS, Android and multiple operating systems. 
When doing experiments with micro bit board, we design the EASY Plug Shield to extend the pins of micro:bit. You only need to insert the micro bit into it.<br>
The golden finger ports and Easy Plugs(RJ11 6P6C ) on shield can be connected to other sensors, modules and micro:bit.<br>

We connect it to sensors and modules with via one special telephone line (RJ11 crystal head), which is convenient and easy.<br>

Meanwhile, it comes with four WS2812 LEDs (controlled by P9), one buzzer (controlled by P0), two DIP switches. <br>
Power switch is used for power control and Voltmeter_Switch is used for the voltage (3.3V, 5V) of Easy Plug.<br>

Although the sensors and modules purchased from other companies comes with RJ11 6P6C port , they may not compatible with ours. <br>



<br>

==Specification==
* Power: DC 6-10V
* Output current: 1.5A
* Interface: RJ11 6P6C interface and golden finger interface
* Size: 98 * 65 * 17mm


== EASY plug ==
EASY plug and RJ11 6P6C interface are practically the 6pin ports , according to the IO port led out by the silk screen on the back. 

<br>[[File:0496-1.png|500px|frameless|thumb]]<br>

Interfaces 
G：GND
V: controlled by Voltmeter_Switch；dial to 5V end，V is 5V，dial to 3V end，V is 3.3V.

I2C Communication Interface
<br>[[File:0496-2.png|200px|frameless|thumb]]<br>
SDA：P20
SCL：P19

SPI Communication Interface
<br>[[File:0496-3.png|200px|frameless|thumb]]<br>

MOSI：P15
MISO：P14
SCK：P13

== Experiment ==
The 4 WS2812 LEDs on the shield display various colors by external power

== Test Code ==
<br>[[File:0496-4.png|500px|frameless|thumb]]<br>

== Test Result ==
<br>[[File:0496-5.png|500px|frameless|thumb]]<br>
The code is uploaded successfully. After power-on, the 4 WS2812 LEDs flash alternately three colors: red, green, and blue.
Attached to a collision module by Easy plug, LED can be restrained by a collision module.

== Test Code ==
<br>[[File:0496-6.png|500px|frameless|thumb]]<br>
== Test Result == 
<br>[[File:0496-7.png|500px|frameless|thumb]]<br>

The code is uploaded successfully. After power on, press the shrapnel on the collision module, the LED lights up, otherwise the LED goes off.



=='''Resources''' ==

*'''Download relevant code:

'''https://fs.keyestudio.com/KS0496'''

== Get One Now ==
*[https://www.keyestudio.com/keyestudio-keybot-coding-robot-control-board-kit-for-arduino-steam-p0059.html  '''Official website'''  ]

*[https://www.aliexpress.com/store/product/Keyestudio-KEYBOT-Programmable-Education-Robot-Control-Board-For-Arduino/1452162_32915956303.html?spm=2114.12010612.8148356.31.6f7b5f38WVxd4f   Shop on Aliexpress]

 [[Category: Shield]]